Tuesday, February 11, 2014
Woodstove Fence Mortise and Tenon Joints
The fence work continues...
On to the mortise and tenon joints!
My tool kit for this part included: my new Gramercy holdfasts (thanks sweetie!), mallet, big-boy mortising chisel (almost silly large), smaller chisel for cleaning up the bottom of the mortises, mortise gauge, square, folding rule, knife and my LN dovetail saw. Heres a shot of the bench top after several hours of work.
The piece in the center is a combination layout gauge and M&T tester for this project. I tried a new technique for chopping the mortises that I read about a while ago over at Peter Follansbees blog - it worked great. A little too great maybe, as I really got into a groove with the mortising - so much so I forgot to take pictures! About all I can offer is a shot of the tester confirming that the mortises are the correct size and depth.
I did remember to take some shots of the tenons being marked and cut.
A final test, and thats one more done...out of 50 total...sigh.
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment